Monday, December 21, 2009

DIY Coathanger Poinsettia Wreath

Our lighted poinsettia wreath made from old wire coat hangers got such a warm reception at our holiday party this weekend, I thought I'd post a little how-to. It's actually a product of a fruit-bowl-attempt-gone-bad which I'd like to look at as a happy holiday lesson. Never be afraid to play with your garbage - you never know what you'll come up with!

For our design, we used 8 wire coat hangers (you can use 6 if you like). It's really simple to do, and you don't need to worry too much about precision as any inconsistencies seem to even out nicely in the end.

1. First, bend the neck of the coat hanger so the hook is perpendicular to the rest of the hanger body.



2. Then bend the hanger at this center point, into two halves. Bend again (on top and bottom) at the middle of each half. Join the hanger tips with wire or clear tape.



3. Finally, arrange all your hanger petals, tips pointing out, into a poinsettia formation, and tape together at the top and bottom seams where they meet. (I tried using wire for this, but it slipped around too much - packing tape seemed to be the way to go.)

For added holiday cheer, wrap a string of lights around the wreath body, and hang in a place where everyone can marvel at your eco-craftiness!

1 comment: